Nouvelles fonctionnalités IPv6 dans la dernière version de notre solution de collaboration audio/Vidéo
La dernière version de notre Call manager CuCM v10.0.1 vient de sortir avec son lot de nouvelles fonctionnalités IPv6
IPv6-only And Dual Stack SIP Endpoints
Administrators can configure IPv6-only or dual stack addressing for SIP endpoints.
IP Phones or other endpoints that use Session Initiation Protocol (SIP) can register with Cisco Unified Communications Manager (Unified Communications Manager) using an IPv6 address. After these phones have registered with Unified Communications Manager, they can operate in IPv6 mode, IPv4 mode, or in dual stack mode. Administrators can specify the order of address preference for these phones by using the IP Addressing Mode Preference for Signaling setting, which is located on the Common Device Configuration panel.
This feature also adds support for all media types, including audio and video, for calls originating from and terminating on IPv6 SIP line devices located in the same cluster, or in different clusters connected by SIP trunks.
The following phones support IPv6 and dual stack addressing:
- Cisco Unified SIP Phone 3905
- Cisco Unified IP Phone 7821
- Cisco Unified IP Phone 7841
- Cisco Unified IP Phone 7845
- Cisco Unified IP Phone 7861
- Cisco Unified IP Phone 8961
- Cisco Unified IP Phone 9951
- Cisco Unified IP Phone 9971
The following SIP Telepresence endpoints support IPv6 and dual stack addressing:
- C-series (C90, C60, C40, C20)
- SX-series (SX20)
- MX-series (MX200, MX300)
- EX-series (EX60, EX90)
Cisco IP Voice Media Streaming Application Service Supports IPv6 Audio Media Connections
The Media Termination Point (MTP) device, software conference bridge, annunciator, and unicast Music On Hold provided by the Cisco IP Voice Media Streaming Application service support both IPv4 and IPv6 audio media connections. The MTP device, software conference bridge, annunciator, and unicast Music On Hold are configured automatically in dual mode when the platform is configured for IPv6 and the IPv6 enterprise parameter is enabled.
IPv6: Mobility support
Cisco Unified Communications Manager (Unified Communications Manager), Release 10.0(1) supports IPv6 addressing from mobile phones.
Tous les détails iciTags: